Untitled Document
 
 
 
 
 
 
 
   
 
 
Mains 220V, 단상, 50/60Hz
Output Current TIG 10 ~ 150A MMA 10 ~ 130A
Output Load Voltage TIG 20 ~ 25V, MMA 25 ~ 35V
No-Load Voltage 68V
Gas Flow Time PRE 0.0 ~ 5.0 sec, Post 0.0 ~ 20.0 sec
Slope Time UP 0 sec, Down 0.0 ~ 15.0 sec
Pulse Frequency 10 ~ 150A
Pulse Width 50% (fixed)
Duty Cycle (TIG) 150A 80%, 120A 100%
Outer Dimension 140*330*240mm
Net Weight 11kg
 
 
 
 
MICROPROCESSOR CONTROL
Digital control enables "memory function" for various welding parameter. Normal control is available from the knobs on front panel and "memory function" is available from microprocessor, something like hidden function. To call "memory function", please turn off the power source and turn on again with pushing "welding mode selection button".

3 (THREE) IN 1(ONE) MACHINE
DC TIG welding, PULSE TIG welding and MMA

DOWN SLOPE TIME
Available by tuning the knob on front panel and works to prevent crack on crater point.

POST GAS FLOW TIME
To prevent dioxide of base metal in welding. Adjustable from 0 sec to 15 sec with 0.2 sec interval.

VARIOUS PULSE FUNCTION

Pulse frequency is available from "front panel" pulse base current is available from "memory" function. Pulse duty is fixed at 50% and not adjustable.

HOT START FUNCTION
Hot start current control is available by pushing welding mode selection button and tuning welding current control knob after you see "h-c" at display mode. This hot start function will help welder to make welding start easier.

COMPACT & LIGHT
About 11kg. Suitable for hand-carry and portable welding.

EASY CONNECTION
Key connector of output terminal makes easy connection to torch and earth and gives the welder safety.
 
 
 
 
Untitled Document